INSPECTION OF CFA NETWORK

E4-E5 CFA
INSPECTION OF CFA NETWORK
Q. 1 , What is the frequency of inspection of every Telephone Exchange/ telecom equipments of BSNL?

A) Once in two years

B) Once in three years

C) Once a year

D) Once in five years

View answer
Q. 2 , Who conducts the inspection of every Telephone Exchange/ telecom equipments of BSNL?

A) Marketing Circle

B) Inspection Circle, erstwhile T&D Circle

C) Technical Circle

D) Accounts Circle

View answer
Q. 3 , What is the purpose of the Inspection Proforma for Exchange?

A) To report on the status of the exchange infrastructure

B) To report on the availability of broadband services

C) To report on the maintenance of records in MDF

D) To report on the general cleanliness of the battery room

View answer
Q. 4 , Which point in the infrastructure checklist requires checking the measured earth value and date of measurement?

A) No. 1

B) No. 2

C) No. 3

D) No. 4

View answer
Q. 5 , What is checked for in point No. 4 of the infrastructure checklist?

A) Working of fire alarm system

B) Availability of fire extinguishers/ sand bucket

C) Diesel availability

D) Capacity of power plant in (Amp) & working load

View answer
Q. 6 , What is the purpose of point No. 12 in the infrastructure checklist?

A) To check the availability of spare fuses

B) To check the working of E/A sets Main & S/B and switchover of load

C) To check the general cleanliness of the battery room

D) To check the health of the battery and the number of faulty cells

View answer
Q. 7 , What is the purpose of checking the synchronization of transmission nodes in the switch room?

A) To ensure that transmission nodes are functioning

B) To ensure that there is redundancy of transmission media

C) To ensure that announcements are being made

D) To ensure that there are no critical pending alarms

View answer
Q. 8 , How often is an inspection of Broad Band service done?

A) Once in two years

B) Once in three years

C) Once a year

D) Once in five years

View answer
Q. 9 , Who conducts the inspection of Broad Band service?

A) Marketing Circle

B) Inspection Circle, erstwhile T&D Circle

C) Technical Circle

D) Accounts Circle

View answer
Q. 10 , What is the purpose of the Technical inspection of Broad Band Service?

A) To report on the status of the exchange infrastructure

B) To report on the availability of broadband services

C) To report on the maintenance of records in MDF

D) To report on the general cleanliness of the battery room

View answer
Q. 11 , What is the purpose of point No. 1 in the General Technical Inspection checklist?

A) To check if a network diagram indicating the connectivity of the node is displayed

B) To check if a board indicating the number of Broad Band customers is displayed

C) To check if the equipment room is clean and the equipment is dust-free

D) To check if the environment variables like temperature, dust, and humidity are being maintained

View answer
Q. 12 , What is checked in the MDF during an inspection of a telephone exchange?

a) Capacity of power plant

b) Working of fire alarm system

c) Neatness in jumpering

d) General cleanliness of battery room

View answer
Q. 13 , What is the capacity of the exchange checked during an inspection of a telephone exchange?

a) No. of power plant modules in working conditions

b) No. of A/C installed/Working & Room Temp

c) Total capacity of the exchange

d) No. of faulty cells

View answer
Q. 14 , What is checked during the inspection of faulty PCBs in a telephone exchange?

a) Availability of spare cards

b) Capacity of power plant in (Amp) & working load

c) Checking of synchronization of transmission node

d) Availability of tools and testers (e.g. multi-meter)

View answer
Q. 15 , What is the purpose of checking the logic switchover from main to standby during an inspection of a telephone exchange?

a) To check for critical pending alarms in the exchange

b) To check for redundancy of transmission media

c) To check for the working of E/A sets Main & S/B and switchover of load

d) To check for the generation & availability of traffic reports

View answer
Q. 16 , What is the purpose of checking the availability of fire extinguishers/sand bucket during an inspection of a telephone exchange?

a) To check for the working of fire alarm system

b) To check the availability of spare fuses

c) To check the availability of fire extinguishers/sand bucket

d) To check the measured earth value and date of measurement

View answer
Q. 17 , What is the purpose of checking the battery test discharge conducted during an inspection of Broad Band service?

a) To check the availability of spare fuses

b) To check the availability of fire extinguishers/sand bucket

c) To check for battery health

d) To check the working of E/A sets Main & S/B and switchover of load

View answer
Q. 18 , What is the purpose of checking the log book available in the equipment room during an inspection of Broad Band service?

a) To check the downtime of the equipment/node

b) To check the working of fire alarm system

c) To check for critical pending alarms in the exchange

d) To check the neatness in jumpering

View answer
Q. 19 , What is the purpose of checking the wiring during an inspection of Broad Band service?

a) To check for dust prevention measures

b) To check the neatness in jumpering

c) To check the availability of tools and testers

d) To check the proper method for reporting the link faults is being followed

View answer
Q. 20 , What is the purpose of checking the board indicating the number of Broad Band customers during an inspection of Broad Band service?

a) To check for battery health

b) To check the proper method for reporting the link faults is being followed

c) To check the environment variables are being maintained

d) To check the number of Broad Band customers

View answer